[LIGHT] (illumination) button
When the [LIGHT] button is pressed, the
buttons shown in colour in the illustration at left
are illuminated for 10 seconds. If you press the
[LIGHT] button again during this 10-second
period, the illumination continues for another
10 seconds.
Using the Remote Control
Do not allow sunlight or light from fluorescent lamps to shine directly
onto the projector's remote control light-receiving area, otherwise it may
interfere with the reception of signals from the remote control.
Battery Replacement Period
If the remote control becomes slow in responding or if it stops working, the batteries may
be spent. If this happens, replace the batteries with fresh ones.
Guide for battery replacement: Approximately 3 months if used for 30
minutes per day
* The replacement period given above may vary depending on the amount of usage and
the ambient conditions.
Use the following type of batteries as replacements.
Battery LR6 (AA) x 2
Remote control light-receiving area
illumination
button
Battery Replacement Period and
Using the Remote Control
Point the remote control
light-emitting area toward one of
the remote control light-receiving
area on the projector and operate
the remote control buttons.
Essen
SET UP GUIDE English-02
2
