Yamaha LPX-500 Owner'S Manual Download | Manualshive

Page: 40 / 80

background image

36

When Having Some Trouble

If you are having a problem with the projector, first check the projector's indicators.
The projector is provided with the following three indicators. These indicators alert you to problems with projector
operation.

The following tables show what the indicators mean and how to remedy problems that they indicate.

: lit

: flashing

: off

Indicator status

Projector status

Problem and remedy

Reference

page

Internal problem

Stop using the projector, disconnect the power cord from the
electrical outlet, and contact your dealer.

Fan problem/Sensor
problem

Stop using the projector, disconnect the power cord from the
electrical outlet, and contact your dealer.

Lamp problem/
Lamp cover problem

Replace the lamp with a new one.
When replacing the lamp, check that the lamp and the lamp cover
are securely installed. If the lamp or lamp cover is not securely
installed, the projector power will not turn on.

Lamp operating
error

This can happen when the main power switch at the rear of the
projector was turned off before the cool-down

period had

finished the last time the projector was turned off, and it was then
turned back on again before one hour had passed.
When turning off the projector, wait 2 minutes. After about 2
minutes, the cooling fan will stop. When the cooling fan stops,
turn off the main power switch and then turn it back on again.
When the main power switch is turned back on, the projector will
return to its previous state, so press the [STANDBY/ON] button
on either the remote control or the projector's control panel to
turn it back on. If the lamp operating error happens again when
the power is turned back on, remove the lamp and check if the
lamp is broken. If it is not broken, reinstall it. If it is broken,
replace it. Then turn on the main power switch at the rear of the
projector and press the [STANDBY/ON] button on either the
remote control or the projector's control panel.
If the indicators still show a problem, stop using the projector,
turn off the main power switch, disconnect the power cord from
the electrical outlet, and contact your dealer.

indicator

LAMP/COVER indicator

TEMP/FAN indicator

Red

Red

Red

Red

Red

Red

Red

Red

Red

«
...
38
39
40
41
42
...
»

Summary of Contents for LPX-500

















































































Reviews:

No comments

Related manuals for LPX-500

Brand: Digital Projection Pages: 12

Brand: BOXLIGHT Pages: 55

Brand: AV Stumpfl Pages: 10

Brand: Lampo Pages: 2

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 2

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 40

Brand: Sanyo Pages: 48

Brand: Sanyo Pages: 66

Brand: Sony Pages: 101

Grand Wega KF-50SX100K

Brand: Sony Pages: 193

Brand: Vivitek Pages: 61

X100U - TLP XGA LCD Projector

Brand: Toshiba Pages: 2

Brand: Toshiba Pages: 2

TLP-XD2000 - XGA LCD Projector

Brand: Toshiba Pages: 28

Brand: Toshiba Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands