manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 68

 

7-22

 

1

2

3

4

5

6

7

8

9

10

11

 

CROSSING A SLOPE

 

Traversing a sloping surface on your ATV requires
you to properly position your weight to maintain
proper balance. Be sure that you have learned the
basic riding skills on flat ground before attempting
to cross a sloping surface. Avoid slopes with slip-
pery surfaces or rough terrain that may upset your
balance.
As you travel across a slope, lean your body in the
uphill direction. It may be necessary to correct the
steering when riding on loose surfaces by pointing

the front wheels slightly uphill. When riding on
slopes, be sure not to make sharp turns either up
or down hill.
If your ATV does begin to tip over, gradually steer
in the downhill direction if there are no obstacles in
your path. As you regain proper balance, gradually
steer again in the direction you wish to travel.

 

EWB01141 

WARNING

 

POTENTIAL HAZARD
Improperly crossing hills or turning on hills.
WHAT CAN HAPPEN
Could cause loss of control or cause the ATV
to overturn.
HOW TO AVOID THE HAZARD
Never attempt to turn the ATV around on any
hill until you have mastered the turning tech-
nique as described in the Owner’s Manual on
level ground. Be very careful when turning
on any hill. Avoid crossing the side of a steep
hill if possible.

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands