manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 34

 

5-3

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU19530

 

Fuel 

 

Make sure that there is sufficient fuel in the tank.
(See page 4-8.)

 

EWB00500 

EBU19560

 

Engine oil 

 

Make sure that the engine oil is at the specified lev-
el. Add oil as necessary. (See page 8-10.)

 

EBU19580

 

Transmission oil 

 

Make sure that the transmission oil is at the speci-
fied level. Add oil as necessary. (See page 8-12.)

 

EBU19640

 

Front and rear brakes 

 

Brake levers

 

●

 

Check for correct free play in the brake levers. If
the free play is incorrect, adjust it. (See pages
8-27 and 8-32.)

 

●

 

Check operation of the levers. They should
move smoothly and there should be a firm feel-
ing when the brake is applied. If not, have the
ATV checked by a Yamaha dealer.

 

Brake operation

 

Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brakes for wear. (See page 8-26.)

 

EWB00530 

WARNING

 

POTENTIAL HAZARD
Improper care when refueling.
WHAT CAN HAPPEN
Fuel can spill, which can cause a fire and se-
vere injury.
Fuel expands when it heats up. If the fuel
tank is overfilled, fuel could spill out due to
heat from the engine or the sun.
HOW TO AVOID THE HAZARD
Do not overfill the fuel tank. Be careful not to
spill fuel, especially on the engine or exhaust
pipe. Wipe up any spilled fuel immediately.
Be sure the fuel tank cap is closed securely.
Do not refuel right after the engine has been
running and is still very hot.

WARNING

 

POTENTIAL HAZARD
Riding with improperly operating brakes.

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands