manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 111

 

8-37

 

1

2

3

4

5

6

7

8

9

10

11

 

3. Thoroughly lubricate the drive chain with a

special O-ring chain lubricant.

CAUTION:

 

ECB00580 

 

Do not use engine oil or any other lubricants
for the drive chain, as they may contain sub-

 

stances that could damage the O-rings.

 

EBU24890

 

Checking and lubricating the cables 

 

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.

 

EWB02120 

EBU24912

 

Checking and lubricating the front and 
rear brake levers 

 

The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.

Recommended lubricant:

Engine oil

WARNING

 

POTENTIAL HAZARD
Damaged control cables.

WHAT CAN HAPPEN
Corrosion can result when the cable sheaths
become damaged, and cables can also be-
come frayed or kinked, which could restrict
the operation of controls and lead to an acci-
dent or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.

 

Recommended lubricant:

Silicone grease

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands