manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 59

 

7-13

 

1

2

3

4

5

6

7

8

9

10

11

 

EWB01030 

 

Know the terrain where you ride. Ride cautiously in

unfamiliar areas. Stay alert for 

 

holes, rocks, or

roots

 

 in the terrain, and 

 

other hidden hazards

 

which may cause the ATV to upset.

 

EWB01040 

WARNING

 

POTENTIAL HAZARD
Operating this ATV on public streets, roads
or highways.
WHAT CAN HAPPEN
You can collide with another vehicle.
HOW TO AVOID THE HAZARD
Never operate this ATV on any public street,
road or highway, even a dirt or gravel one. In
many states it is illegal to operate ATVs on
public streets, roads and highways.

WARNING

 

POTENTIAL HAZARD
Failure to use extra care when operating this
ATV on unfamiliar terrain.
WHAT CAN HAPPEN
You can come upon hidden rocks, bumps, or
holes, without enough time to react. Could
result in the ATV overturning or going out of
control.
HOW TO AVOID THE HAZARD
Go slowly and be extra careful when operat-
ing on unfamiliar terrain. Always be alert to
changing terrain conditions when operating
the ATV.

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands