manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 134

 

11-3

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU26060

 

Noise regulation 

 

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED:

 

Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by
any person other than for purposes of maintenance, repair, or replacement of any device or element of de-
sign incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the
ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design
has been removed or rendered inoperative by any person.
“AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW”.
These acts include tampering with the following systems; i.e., modification, removal, etc.

 

Exhaust system

 

●

 

Muffler

 

●

 

Exhaust pipe

 

●

 

Silencer

 

Intake system

 

●

 

Air cleaner case

 

●

 

Air cleaner element

 

●

 

Intake duct

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands