manualshive.com logo in svg

Yamaha GRIZZLY 125, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 Owner'S Manual Download Page 44

 

6-6

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU20730

 

Parking on a slope 

 

EWB00760 

 

1. Bring the ATV to a stop by applying the brakes

in the forward position.

2. Stop the engine.
3. With the rear brake applied, apply the parking

brake.

 

1. Locked position

WARNING

 

POTENTIAL HAZARD
Parking on a hill or other incline.
WHAT CAN HAPPEN
The ATV could roll out of control, increasing
the chance of an accident.

1

 

HOW TO AVOID THE HAZARD
Avoid parking on hills or other inclines. If you
must park on an incline, place the ATV trans-
versely across the incline, shift the drive se-
lect lever to the forward position, stop the
engine, apply the parking brake, and then
block the front and rear wheels with rocks or
other objects.
Do not park the ATV at all on hills that are so
steep you could not walk up them easily.

Summary of Contents for GRIZZLY 125



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands