Yamaha FZS1000(N) 2001, Service Manual

Page: 63 / 403

2-41
CABLE ROUTING
SPEC
K Fasten the fuel hose and air induction system hose
with a plastic clamp.
L Route the coolant reservoir hose under the frame
cross pipe.
M Fasten the fuel hose and frame with a plastic band.
N Put the fuel tank drain hose into the frontward nipple
on the fuel tank.
O Put the fuel tank breather hose into the backward
nipple on the fuel tank.
P Route the coolant reservoir hose under the air vent
hose and air induction system hose.
Q Route the air vent hose upper the main harness.
R All coupler into the rubber cover.
S Fasten the Rectifier / regulator lead with a plastic
band in the main harness.
A Fasten the flasher light lead and headlight lead with
a plastic clamp.
B Route the rectifier / regulator lead upper the fan mo-
tor lead and EXUP servomotor lead.
C Route the throttle cable right side the fan motor
lead, EXUP servo motor lead and thermo unit lead.
D Fasten the flasher light lead with a plastic clamp.
E Route the all leads between the frame cross pipe
and bracket.
F Do not excessively bend the throttle cable.
G Route the coolant reservoir hose under the frame
cross pipe.
H Fasten the ignition coil and ignition coil lead with a
plastic clamp.
I Route the T.P.S. lead under the air vent hose.
J Fasten the EXUP cable with a plastic band.