Yamaha FZS1000(N) 2001, Service Manual

Page: 58 / 403

2-36
1
Fuel pump lead
2
Fuel pump
3
EXUP cable
4
Handlebar switch lead (right)
5
Throttle cable 1
6
Throttle cable 2
7
Water-carburetor hose
8
Fan motor lead
9
Coolant reservoir tank over flow
hose
10
Fuel tank drain hose
11
Fuel tank breather hose
12
White paint mark
13
Rear brake light switch lead
14
Neutral switch lead
15
Speedo sensor lead
16
Pickup coil lead
CABLE ROUTING
SPEC
17
Handle crown
18
Handlebar switch lead
19
Brake hose guide
A Fasten the fuel pump lead, pickup coil lead, neutral switch lead, speed
sensor lead, rear brake light switch lead and fuel pump with a plastic
clamp.
B Fasten the fuel hose, pickup coil lead, neutral switch lead and speed
sensor lead with a plastic clamp under the fuel hose.
C Put the EXUP cable into the air box cover.
D Route the T.P.S. lead inward the EXUP cable.
E Fasten the water-carburetor hose with a plastic band.
F Route the coolant hose over the frame.
G Fasten the handlebar switch lead and frame with a plastic guide.
H Align the white tape mark of the handlebar switch lead (right) with the
tank rail welding bead and clamp down throttle cables 1 and 2.