Yamaha FZ1-NW Page 64 Owner'S Manual Download | Manualshive

Page: 64 / 98

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-18

EAU22080

Adjusting the clutch lever free
play

The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.
To increase the clutch lever free play,
turn the adjusting bolt in direction (a).
To decrease the clutch lever free play,
turn the adjusting bolt in direction (b).

NOTE:

If the specified free play cannot be ob-
tained as described above or if the
clutch does not operate correctly, have
a Yamaha dealer check the internal
clutch mechanism.

EAU22270

Adjusting the rear brake light
switch

The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, adjust the brake light switch
as follows.
Turn the adjusting nut while holding the
rear brake light switch in place. To
make the brake light come on earlier,
turn the adjusting nut in direction (a). To
make the brake light come on later, turn
the adjusting nut in direction (b).

1. Clutch lever free play adjusting bolt

2. Clutch lever free play

1. Rear brake light switch

2. Rear brake light switch adjusting nut

U2D121E0.book Page 18 Tuesday, September 19, 2006 1:30 PM

ProCarManuals.com

«
...
62
63
64
65
66
...
»

Summary of Contents for FZ1-NW



































































































Reviews:

No comments

Related manuals for FZ1-NW

Brand: ICON Pages: 8

Brand: S&B Filters Pages: 7

WARRIOR YFM350XS

Brand: Yamaha Pages: 46

Brand: Puch Pages: 151

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 124

ROAD STAR XV16A

Brand: Yamaha Pages: 117

X MAX CZD300P 2022

Brand: Yamaha Pages: 142

Brand: Yamaha Pages: 97

Brand: Yamaha Pages: 119

Brand: Yamaha Pages: 96

Brand: Honda Pages: 4

Brand: hepco & becker Pages: 4

6304541 00 02 chrom

Brand: hepco & becker Pages: 6

YZF-R1P 2001-2003

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 36

Brand: Yamaha Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands