INSTRUMENT AND CONTROL FUNCTIONS
4-26
4
2. Remove the key.
Ri
d
er seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the cap, then push the
rider seat lock lever, located under
the back of the rider seat, to the
left as shown, and then pull the
seat off.
To install the rider seat
1. Install the cap with the arrow mark
facing forward.
2. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
3. Install the passenger seat.
TIP
Make sure that the seats are prop-
erly secured before riding.
The rider seat height can be ad-
justed to change the riding posi-
tion. (See the following section.)
1. Projection
2. Seat holder
1
2
1. Cap
2. Rider seat lock lever
2
1
1. Projection
2. Seat holder
2
1
U2SC10E0.book Page 26 Thursday, September 4, 2014 11:04 AM
