INSTRUMENT AND CONTROL FUNCTIONS
4-6
4
The electric tachometer allows the rid-
er to monitor the engine speed and
keep it within the ideal power range.
When the key is turned to “ON”, the ta-
chometer will sweep across the r/min
range and then return to zero r/min in
order to test the electrical circuit.
NOTICE
ECAM1150
Do not operate the en
g
ine in the ta-
chometer hi
g
h-rpm zone.
Hi
g
h-rpm zone: 11250 r/min an
d
a
b
ove
Clock
The clock is displayed when the key is
turned to “ON”.
To set the clock, see page 4-10.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
decreases. When the last segment of
the fuel meter and fuel level warning
indicator “
” start flashing, refuel as
soon as possible. When the key is
turned to “ON”, all of the display seg-
ments of the fuel meter will appear for
a few seconds, and then the fuel meter
shows the actual fuel level.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, the fol-
lowing cycle is repeated until the
malfunction is corrected: fuel level seg-
ments and fuel level warning
indicator “
” flash eight times, then go
off for approximately 3 seconds. If this
occurs, have a Yamaha dealer check
the electrical circuit.
Eco in
d
icator
1. Clock
1
1. Fuel level warning indicator “
”
2. Fuel meter
2
1
1. Eco indicator “ECO”
1
U2SC10E0.book Page 6 Thursday, September 4, 2014 11:04 AM