Yamaha FJ-09 2014 Owner'S Manual Download Page 102

Page: 102 / 126

PERIODIC MAINTENANCE AND ADJUSTMENT

7-39

EAU42365

Trou

leshootin

charts

Startin

pro

lems or poor en

ine performance

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

Remove the spark plugs
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gaps, or replace the spark plugs.

Have a Yamaha dealer check the vehicle.

Operate the electric starter.

4. Compression

There is compression.

There is no compression.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The engine does not start.
Check the ignition.

The battery is good.

Check the battery lead connections,
and have a Yamaha dealer charge
the battery if necessary.

Dry

Wet

Operate the electric starter.

U2SC10E0.book Page 39 Thursday, September 4, 2014 11:04 AM

Summary of Contents for FJ-09 2014































































































































Search results

Summary of Contents for FJ-09 2014

Reviews:

Related manuals for FJ-09 2014

Brands by name

Popular brands

Yamaha FJ-09 2014, Owner'S Manual

Search results

Summary of Contents for FJ-09 2014

Reviews:

Related manuals for FJ-09 2014

Brands by name

Popular brands