INSTRUMENT AND CONTROL FUNCTIONS
4-9
4
“Setting mode” on page 4-10 for de-
tailed information.
Ambient temperature display:
This display shows the ambient tem-
perature from 16 °F to 199 °F in 1 °F in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
TIP
16 °F will be displayed even if the
ambient temperature falls below
16 °F.
The accuracy of the temperature
reading may be affected when rid-
ing slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Coolant temperature display:
The coolant temperature display indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load.
If the message “Hi” flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 7-40.)
TIP
The selected information display can-
not be switched while the message
“Hi” is flashing.
NOTICE
ECA10022
Do not continue to operate the en-
g
ine if it is overheatin
g
.
Average fuel consumption display:
The average fuel consumption display
modes “km/L”, “L/100km” or “MPG”
show the average fuel consumption
since the display was last reset.
The “km/L” display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
The “L/100km” display shows the
average amount of fuel necessary
to travel 100 km.
The “MPG” display shows the av-
erage distance that can be trav-
eled on 1.0 US gal of fuel.
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the “RESET” button briefly so
77
A.TEMP
˚F
Lo
C.TEMP
˚F
GEAR
4
Hi
C.TEMP
˚F
7.6
FUEL AVG
MPG
U2SC10E0.book Page 9 Thursday, September 4, 2014 11:04 AM
