Yamaha FGDP-50, User Manual

Page: 79 / 124

FGDP-50 User Guide
79
an external tone generator via MIDI transmission from this
product.
P02 Loud1 Tx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Loud1.”
For all Pads, “ MIDINote ” is set based on the GM (General
MIDI) Drum Map. These settings are for controlling an
external tone generator via MIDI transmission from this
product.
P03 Loud2 Tx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Loud2.”
For all Pads, “ MIDINote ” is set based on the GM (General
MIDI) Drum Map. These settings are for controlling an
external tone generator via MIDI transmission from this
product.
P04 Hard1 Tx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Hard1.”
For all Pads, “ MIDINote ” is set based on the GM (General
MIDI) Drum Map. These settings are for controlling an
external tone generator via MIDI transmission from this
product.
P05 Hard2Tx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Hard2.”
For all Pads, “ MIDINote ” is set based on the GM (General
MIDI) Drum Map. These settings are for controlling an
external tone generator via MIDI transmission from this
product.
P06 Fixed Tx For all Pads, “ VelFixVal ” and “ ATFixVal ” are set to “127.” For
all Pads, “ MIDINote ” is set based on the GM (Gen eral MIDI)
Drum Map. These settings are for controlling an external
tone generator via MIDI transmission from this product.
P07 Normal Rx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Normal.”
In addition, “ MIDINote ” for all Pads is set so that the
numbers are ordered sequentially. These settings are for
controlling the built-in tone generator from an external
device via MIDI.
P08 Loud1 Rx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Loud1.”
For all Pads, “ MIDINote ” is set so that th e numbers are
ordered sequentially. These settings are for controlling the
built-in tone generator from an external device via MIDI.
P09 Loud2 Rx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Loud2.”
For all Pads, “ MIDINote ” is set so that the numbers are
ordered sequentially. These settings are for controlling the
built-in tone generator from an external device via MIDI.
P10 Hard1 Rx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Hard1.”
For all Pads, “ MIDINote ” is set so that the numbers are
ordered sequentially. These settings are for controlling the
built-in tone generator from an external device via MIDI.
P11 Hard2 Rx For all Pads, “ VelCurve ” and “ ATCurve ” are set to “Hard2.”