Yamaha FGDP-50, User Manual

Page: 121 / 124

FGDP-50 User Guide
121
Problem Cause Solution
Hitting a Pad causes a
session to start
playing. [SESS]
→
SynchroStart is
set to “O n .”
Set [SESS]
→
SynchroStart to “Off.”
Hitting the [7
START/STOP] RGB
Square Pad does not
stop the session that
is playing. The product is in a mode
other than Session Creator
Mode. Press the [SESS] button to enter Session
Creator Mode, and then hit the [7
START/STOP] RGB Square Pad.
Hitting the [2
INTRO/ENDING]
– [6
MAIN D] RGB Square
Pads does not switch
between the sections
of the session that is
playing.
The product is in a mode
other than Session Creator
Mode. Press the [SESS] button to enter Session
Creator Mode, and then hit the [2
INTRO/ENDING]
– [6 MAIN D] RGB Square
Pads.
The Sequencer’s 16th
notes are not equally
spaced.
[MENU] → Utility → Swing is
set to a value other than
“ 0. ”
Set [MENU] → Utility → Swing to “ 0. ”
@
Operations
Problem Cause Solution
The buttons do not
work. The Panel Lock function is
enabled. Follow the instructions on this page to
disable the Panel Lock function.
The Velocity of Note
On does not increase
(decrease) even if
the Pad is hit
strongly (softly). The setting for the current
Trigger does not match the
strength with which you hit
the Pad. Follow the instructions on this page to
select a different Trigger, or change
one of the following items.
• “ Velocity Fixed Value ” and “ Velocity
Curve ” for each Pad
• “ Velocity Minimum ” and “ Velocity
Maximim ” for each Pad
• “ ADGain ” for each Pad
@
Other
Problem Cause Solution