FGDP-50 User Guide
72
When the current setting is registered, the button that is pressed will blink red for a few
moments and then remain a steady red. In addition, on the top screen of Registration
Memory Bank Mode, an [E] appears to the right of the Registration Memory Bank
number.
NOTICE
•
Settings that you have registered in a Registration Memory will be lost if you select a
different Registration Memory Bank. If you do not want to lose those settings, be sure to
save the Registration Memory Bank.
Saving settings in a User Registration Memory Bank
You can save Registration Memories [I]–[IV] together as one bank.
1.
Press the [ENTER] button on the top screen of Registration Memory Bank Mode.
2.
Use the [+] and [-] buttons to select the bank number (U01–U50) that is the save
destination.
3.
Press the [ENTER] button to display the Bank Name edit screen. The cursor will appear
at the left end of the Bank Name.
4.
Edit the name of the Registration Memory Bank.
Use the [<] and [>] buttons to move the cursor and then use the [+] and [-] buttons to
select a character at the cursor position. Repeat these steps to finish the name. See
