Yamaha FGDP-50, User Manual

Page: 102 / 124

FGDP-50 User Guide
102
SpeakerOut Abbreviation for Speaker Output.
Select whether to output audio from the
built-in speaker.
• When set to “Off,” audio is not output
from the built-in speaker.
•
When set to “HeadphoneSw,” audio is
not output from the built-in speaker
when a cable is connected to the
[PHONES/OUTPUT] jack, but audio is
output from the built-in speaker when a
cable is not connected to the
[PHONES/OUTPUT] jack.
• When set to “On,” audio is output from
the built-in speaker, regardless of
whether a cable is connected to the
[PHONES/OUTPUT] jack or not. If a
cable is connected to the
[PHONES/OUTPUT] jack when this
setting is selected, the Volume and
SpeakerEQ/Comp settings for
[PHONES/OUTPUT] are also applied to
the sound from the built-in speaker.
Off,
HeadphoneSw,
On HeadphoneSw
USBAudioOutG Abbreviation for USB Audio Output Gain.
Sets the amount of volume amplification
when outputting audio to an external
device connected via USB. A positive value
increases the volume while a negative
value decreases the volume. -18, -12, -6, 0,
+6, +12, +18 dB 0 dB
@
Sequencer swing setting
Item
(Display) Description Setting Range Default
Setting
Swing In Sequencer functions such as Click and Session
Creator, the up beat of eighth notes is shifted to
create a swing feel. The larger the value in the
positive direction, the greater the sense of swing.
The larger the value in the negative direction, the
greater the swing feeling with the down and up
beats reversed.
-11 – 0 – +11 0
@