For more information, please visit
www.earthworksaudio.com or call 1-603-654-2433.
7-PIECE MICROPHONE SYSTEM FOR DRUMS
D K 7 D R U M K I T
Page 1: ...For more information please visit www earthworksaudio com or call 1 603 654 2433 7 PIECE MICROPHONE SYSTEM FOR DRUMS D K 7 D R U M K I T ...
Page 2: ...h on the body of the microphone from the bottom XLR connector end to move the microphone up inside the rubber holder The fit will be firm so you will need to apply a little pressure to move the microphone body up until it stops naturally at the logo ring The RM1 is designed specifically for the DM20 allowing you to mount the microphone on the side of a tom or snare The RM1 can also be used on the ...
Page 3: ...sponse 20Hz 20kHz Polar Pattern Cardioid Sensitivity 8mV Pa 42 dBV Pa Power Requirements 24 48V Phantom 10mA Peak Acoustic Input 150dB SPL Output XLR PIN 2 Minimum Output Load 1000Ω balanced between pins 2 3 Noise 20dB SPL A weighted Dimensions L x D 7 57 inches x 860 inches 192 2mm x 21 8mm Weight 36 lb 164g SR25 Frequency Response 20Hz 20kHz 2dB at 30cm Polar Pattern Cardioid Sensitivity 10mV Pa...
Page 4: ...hone is positioned at an appropriate distance from the sound source External noise in your recording environment is kept to a minimum Your recording space is at room temperature and free of dust If your issue persists after checking please contact us via our website TROUBLESHOOTING Some sensitive audio interfaces and microphone preamps without pads may not be able to handle the high signal levels ...
