Components
36
Twin type
Triple type
EMU35152
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pressing the switch “
” (up) trims the out-
board motor up, and then tilts it up. Pressing
the switch “
” (down) tilts the outboard motor
down and trims it down. When the switch is re-
leased, the outboard motor will stop in its cur-
rent position. For instructions on using the
power trim and tilt switch, see pages 74 and
77.
EMU26153
Power trim and tilt switch on bottom
engine cowling
The power trim and tilt switch is located on the
side of the bottom engine cowling. Pressing
the switch “
” (up) trims the outboard motor
up, and then tilts it up. Pressing the switch
“
” (down) tilts the outboard motor down and
trims it down. When the switch is released,
the outboard motor will stop in its current po-
sition.
For instructions on using the power trim and
tilt switch, see page 77.
WARNING
EWM01030
Use the power trim and tilt switch located
on the bottom engine cowling only when
the boat is at a complete stop with the en-
gine off. Attempting to use this switch
while the boat is moving could increase
ZMU05987
ZMU05988
ZMU06234
UP
DN
ZMU05822
UP
DN
U6BR11E0.book Page 36 Friday, June 13, 2008 3:43 PM
©
2019 Yamaha Motor Corporation, U.S.A.
