Maintenance
96
4. Remove the gear oil drain screw and
gasket.
5. Remove the oil level plug and gasket to
allow the gear oil to drain completely.
NOTICE:
Check the used gear oil after
it has been drained. If the gear oil is
milky or contains water or a large
amount of metal particles, the gear
case may be damaged. Have a
Yamaha dealer check and repair the
outboard motor.
[ECM00714]
TIP:
For disposal of used gear oil, consult your
Yamaha dealer.
6. Remove any metal particles on the mag-
netic gear oil drain screw.
NOTICE:
If
there is an excessive quantity of met-
al particles on the magnetic gear oil
drain screw, this can indicate lower
unit problem. Consult your Yamaha
dealer.
[ECM01901]
7. Place the outboard motor in a vertical
position. Using a flexible or pressurized
filling device, inject the gear oil into the
gear oil drain screw hole.
1. Cooling water inlet cover
2. Bolt
1. Gear oil drain screw
2. Gasket
1
1
2
ZMU07189
1
2
ZMU07190
1. Oil level plug
2. Gasket
1
2
ZMU07191
6CE-9-36-1E0.book 96 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©
2019 Yamaha Motor Corporation, U.S.A.
