61
DTX-MULTI 12
Message
Full meaning
Sample is protected.
This message is displayed if the selected audio
fi
le is write protected and cannot be overwritten.
Sample is too long.
This message is displayed if the audio
fi
le is too long to be loaded.
Sample is too short.
This message is displayed if the audio
fi
le is too short to be loaded.
Seq data is not empty.
This message is displayed upon activating Record Mode if no empty patterns are available for recording.
Seq memory full.
This message is displayed if the instrument’s internal memory for sequence data is full, making it impossible to
perform record new patterns, perform associated management tasks, or load data from a USB memory device.
To free up some of this sequence memory, delete unneeded User patterns.
System memory crashed.
This message is displayed if a problem occurred while writing data to the instrument’s internal
fl
ash ROM.
USB connection terminated.
This message is displayed if connection with a USB memory device was lost due to the occurrence of an abnor-
mal electric current. Unplug the USB memory device and press the [ENTER] button to return.
USB device full.
This message is displayed if a USB-memory device is full and no more
fi
les can be saved on it. In such a case,
use a new USB memory device or make space by erasing unwanted data from the current device.
USB device not ready.
This message is displayed if a USB memory device has not been correctly plugged into the instrument.
USB device read/write error.
This message is displayed if an error occurred during the exchange of data with a USB memory device.
USB device write protected.
This message is displayed if the USB memory device is write protected or if you are attempting to save data on
a read-only device such as a CD drive.
Excessive demand for USB power.
This message is displayed if the current being drawn by the USB memory device exceeds the level supported
by the instrument.
USB transmission error.
This message is displayed if an error occurred during communication with the USB memory device.
Wave memory full.
This message is displayed if the instrument’s wave memory is full, preventing operations such as the importing
and loading of data.
Wave stored.
This message is displayed to con
fi
rm that the selected wave has been successfully stored.
Utility stored.
This message is displayed to con
fi
rm that utility settings have been successfully stored.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
