Yamaha DRX-2, Service Manual

Page: 81 / 190

DRX-2
DRX-2
81
11600 “”
11601 “Init of I2C failed”
11602 “The mute of the audio failed”
11700 “”
11701 “Init of I2C failed”
11702 “The muting of the audio failed”
11703 “The demute of the audio failed”
11704 “The selection of the clock source failed”
11707 “Setup of Front panel failed”
11708 “Sine on Front panel keyboard failed”
11800 “”
11801 “Init of I2C failed”
11802 “The muting of the audio failed”
11803 “The demute of the audio failed”
11804 “The selection of the clock source failed”
11805 “Error cannot start VSM audio in port”
11900 “”
11901 “Init of I2C failed”
11902 “The muting of the audio failed”
11903 “The demute of the audio failed”
11904 “The selection of the clock source failed”
11905 “Error cannot start VSM audio in port”
12000 “”
12001 “Invalid input”
12100 “”
12200 “”
12201 “I2C bus busy before start”
12202 “NVRAM access time-out”
12203 “No NVRAM acknowledge”
12204 “NVRAM time-out”
12205 “NVRAM Write/Read back failed”
12300 “”
12301 “I2C bus busy before start”
12302 “NVRAM read access time-out”
12303 “No NVRAM read acknowledge”
12304 “NVRAM read failed”
13000 “Bootcode application version : bootversion”
13001 “Can not find version in FLASH.”
13100 “ R e c o r d e r a p p l i c a t i o n v e r s i o n :
recorderversion”
13101 “Can not find version in FLASH.”
13200 “Diagnostics application version : diagversion”
13201 “Can not find version in FLASH.”
13300 “ D o w n l o a d a p p l i c a t i o n v e r s i o n :
downloadversion”
13301 “Can not find version in FLASH.”
13700 “”
13701 “Turning off MacroVision failed”
20000 “”
20001 “I2C bus busy before start”
Error Nr Error String
10000 “Checksum is OK”
10001 “segment name Checksum doesn’t match” or
“segment name segment not found”
10100 “”
10101 “FLASH 1 Write access test failed”
10200 “”
10201 “FLASH 2 Write access test failed”
10300 “”
10301 “FLASH write test failed”
10302 “FLASH write command failed”
10303 “FLASH write test done max. number of times”
10400 “”
10401 “HostDec SDRAM Memory data bus test goes
wrong.”
10402 “ HostDec SDRAM Memory address bus test
goes wrong.”
10403 “ HostDec SDRAM Physical memory device
test goes wrong.”
10500 “”
10501 “ HostDec SDRAM Memory data bus test
goes wrong.”
10502 “ HostDec SDRAM Memory address bus test
goes wrong.”
10503 “ HostDec SDRAM Physical memory device
test goes wrong.”
10600 “”
10601 “HostDec DRAM Memory data bus test goes
wrong.”
10602 “HostDec DRAM Memory address bus test
goes wrong.”
10603 “HostDec DRAM Physical memory device test
goes wrong.”
10700 “”
10701 “HostDec DRAM Memory data bus test goes
wrong.”
10702 “HostDec DRAM Memory address bus test
goes wrong.”
10703 “HostDec DRAM Physical memory device test
goes wrong.”
10800 “Host Decoder version(cut) number: version
number”“Digital hardware version”
10801 “Can not find version in FLASH.”
10900 “”
10901 “Error muting audio”
11000 “”
11001 “Error demuting audio”
11500 “”
11501 “Init of I2C failed”
11502 “The selection of the clock source failed”
11504 “The demute of the audio failed”
Error Nr Error String
3. Nuclei Error Codes
In the following table the error codes will be described.