Yamaha DRX-2 Service Manual Download Page 73

Page: 73 / 190

DRX-2

Nucleus Name

DS_SYS_SlashVersionGet

Nucleus Number

1218

Description

Get the slash version of the system

Technical

Issue the command to get the slash version to the analog board

Return the received information to the user

Execution Time

Less than 1 second.

User Input

None

Error

Number

Description

121800

Getting the slash version succeeded

121801

Getting the slash version failed

121802

The IIC write failed

121803

The IIC read failed

121804

There was no response from the analog board.

121805

No DS errCode known for analog board error:

Example

DS:> 1218

121800: The slash version is: 82

Test OK @

Nucleus Name

DS_SYS_VirginModeOn

Nucleus Number

1220

Description

Turn on the virgin mode functionality (e.g. the auto channel search upon start-up)

Technical

Issue the command to set the bit for the virgin mode to the analog board

Wait for the result and return this to the user

Execution Time

Less than 1 second.

User Input

None

Error

Number

Description

122000

Turning on the virgin mode succeeded

122001

Turning on VirginMode on the Analog Board failed.

122002

The returned errorcode from the analog board is unknown:

122003

No DS errCode known for analog board error:

122004

There was no response from the analog board.

Example

DS:> 1220

122000:

Test OK @

Nucleus Name

DS_SYS_Virginize

Nucleus Number

1219

Description

(Re-) Virginize the recorder. User data in the NVRAM of the analog board is cleared

Technical

Issue the command to return to the factory defaults to the analog board

Wait for the result and return this to the user

Execution Time

1 second.

User Input

None

Error

Number

Description

121900

Virginization succeeded

121901

Virginization on the Analog Board failed.

121902

The returned errorcode from the analog board is unknown:

121903

No DS errCode known for analog board error:

121904

There was no response from the analog board.

Example

DS:> 1219

121900:

Test OK @

Summary of Contents for DRX-2































































































































































































Search results

Summary of Contents for DRX-2

Reviews:

Related manuals for DRX-2

Brands by name

Popular brands

Yamaha DRX-2, Service Manual

Search results

Summary of Contents for DRX-2

Reviews:

Related manuals for DRX-2

Brands by name

Popular brands