62
CVP-701 Reference Manual
Song R
ecor
ding via MIDI – R
ecor
ding Y
our P
e
rfor
mance via MIDI –
5
3 MIX
This function lets you mix the data of two channels and place the results in a different channel. It also lets
you copy the data from one channel to another.
4 CHANNEL TRANSPOSE
This allows you to transpose the recorded data of individual channels up or down by a maximum of two
octaves in semitone increments.
NOTE
Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If you transpose the channels of Drum kits, the
instruments assigned to each key will be changed.
[2
]/
[3
]
SOURCE 1
Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of
the channel specified here are copied to the destination channel.
[4
]/
[5
]
SOURCE 2
Determines the MIDI channel (1 – 16) to be mixed. Only note events of
the channel specified here are copied to the destination channel. Besides
the values 1 – 16, there is a “COPY” setting that allows you to copy the
data from Source 1 to the destination channel.
[6
]/
[7
]
DESTINATION
Determines the channel into which the mix or copy results will be placed.
[F]
CH 1–8/CH 9–16
Toggles between the two channel displays: Channels 1–8, and Channels 9–16.
[G]
ALL CH
To simultaneously set all channels to the same value, adjust the Channel
Transpose for one of the channels while holding down this button.
