CVP-701 Reference Manual
19
St
yles – Pla
y
in
g Rh
ythm and A
ccompaniment –
3
[B]
OTS LINK
TIMING
This applies to the OTS Link function. This parameter determines the
timing in which the One Touch Settings change with the MAIN VARIA-
TION [A] – [D] change. (The [OTS LINK] button must be on.)
REAL TIME
One Touch Setting is immediately called up when you press a MAIN
VARIATION button.
NEXT BAR
One Touch Setting is called up at the next measure, after you press a
MAIN VARIATION button.
[C]
STOP ACMP
When the [ACMP ON/OFF] button is on, [SYNC START] is off, and this
parameter is set to the value other than “DISABLED,” you can play
chords in the chord section of the keyboard with the Style stopped, and
still hear the accompaniment chord. In this condition — called “Stop
Accompaniment” — any valid chord fingerings are recognized and the
chord root/type are shown in the display. Here, you can determine
whether the chord played in the chord section will sound or not in the
Stop Accompaniment status.
DISABLED
Disables the Stop Accompaniment feature. When Style playback is
stopped, any pressed notes in the chord section of the keyboard will not
be recognized as chords.
OFF
The chord played in the chord section will not sound.
STYLE
The chord played in the chord section will sound via the Voices for the
Pad part and the Bass channel of the selected Style.
FIXED
The chord played in the chord section will sound via the specified Voice,
regardless of the selected Style.
NOTE
When the selected Style contains MegaVoices, unexpected sounds may result when this is set to
“STYLE.”
NOTE
When you record a song, the chord detected by playing the Stop Accompaniment can be recorded
regardless of the setting here. Please note that both the Voice that is sounded and the chord data
will be recorded when set to “STYLE,” and only the chord data will be recorded when set to “OFF”
or “FIXED.”
NOTE
When this is set to “DISABLED,” chords are not recognized while the Style is stopped. This is why
Keyboard Harmony (
) is not applied even if you play a chord in the chord section of the key-
board while the Style is stopped.
[F]
ACMP ON/OFF
DEFAULT
Determines whether the [ACMP ON/OFF] button is on or off when the
power is turned on.
[1
]/
[2
]
DYNAMICS
CONTROL
This determines how the Style playback volume changes depending on
the playing strength.
• WIDE
........... The volume changes over a wide range.
• MEDIUM
..... The volume changes over a medium range.
• NARROW
.... The volume changes over a narrow range.
• OFF
.............. The volume is kept the same regardless of playing
strength.
