Yamaha cvp-701 clavinova Reference Manual Download Page 50

Page: 50 / 110

CVP-701 Reference Manual

Song R

ecor

ding via MIDI – R

ecor

ding Y

our P

rfor

mance via MIDI –



Song Creator Display Structure

The Song Creator can be called up via [FUNCTION]

→

TAB [

][

] MENU2

→

[B] SONG CREATOR.

There are several Pages (tabs) in the Song Creator display.

• REC MODE

For re-recording the Song. See

page 57

• SETUP

For selecting the panel setups to be recorded to the top position of the Song. See

page 59

• CHANNEL

For editing the Channel events. See

page 60

• CHORD

For recording the Chords and Sections with timing (

page 54

) or editi ng them (

page 64

• 1-16

For recording the melodies (Step Recording; see below) or editing them (

page 64

• SYS/EX.

For editing the System Exclusive events (tempo, time signature, etc.). See

page 64

• LYRICS

For inputting/editing the Song name and lyrics. See

page 65

Recording Melodies (Step Recording)

Press the SONG CONTROL [REC] and SONG CONTROL [STOP] buttons
simultaneously.

A blank Song (“New Song”) is called up for recording.

NOTE

Selecting a blank Song initializes the panel settings.

Call up the operation display.

[FUNCTION]

→

TAB [

][

] MENU2

→

[B] SONG CREATOR

→

TAB [

][

] 1-16

Press the [F] button to select the channel for recording.

Press the [G] (STEP REC) button to call up the STEP RECORD display.

Summary of Contents for cvp-701 clavinova















































































































Search results

Summary of Contents for cvp-701 clavinova

Reviews:

Related manuals for cvp-701 clavinova

Brands by name

Popular brands

Yamaha cvp-701 clavinova, Reference Manual

Search results

Summary of Contents for cvp-701 clavinova

Reviews:

Related manuals for cvp-701 clavinova

Brands by name

Popular brands