CVP-809/CVP-805 Owner’s Manual
58
2
Touch the desired Style.
For the example score above, touch [Country & Blues] category and touch [Modern Country],
then touch [Country 8Beat 2].
The Style category can be selected also by pressing one of the
STYLE buttons.
NOTE
You can change the sub category by pressing the same Style category button
twice or more.
3
Make sure that the STYLE CONTROL [ACMP ON/OFF] button is turned on.
When turned on, the specific left-hand section of the keyboard can be used as the Chord
section, and chords played in this section are automatically detected and used as a basis for fully
automatic accompaniment with the selected Style.
NOTE
• The Split Point can be changed as desired (page 52).
• By default, the chord section (Chord Detection Area) is set to the left-hand section, but you can change it to the right-
hand section (page 65) if desired.
• When the [ACMP ON/OFF] button is off, only the rhythm part is played back (auto accompaniment is not played back).
4
Return to the Home display, touch [
] at the upper left to expand the Style area,
then touch [ ] (SYNC START) to enable Sync Start.
Here and in the later steps, the operation in the Style area of the Home display can be controlled
by the STYLE CONTROL buttons (page 59).
5
Play a chord with your left hand to start the selected Style.
Referring to the notation on page 57, play chords with your left hand and a melody with your
right.
6
Touch [
R
/
J
] (START/STOP) to stop Style playback.
You can also stop playback by pressing one of the ENDING [I] – [III] buttons at the “Ending”
location on the notation (page 60).
Chord section
Split Point (F
P
2 as defa
u
lt)
4
6
