CVP-809/CVP-805 Owner’s Manual
109
10
C
on
n
ec
tio
n
s –
U
sin
g
Y
our
In
str
umen
t w
ith
O
th
er
D
ev
ices
–
To the [MIC/LINE IN] jack (standard 1/4" phone jack), you can connect a microphone, guitar, or other
various equipment. For instructions on connecting a microphone, refer to page 83.
Note that you need to select “MIC” or “LINE IN” depending on the connected equipment. When the
output level of the connected equipment (such as a microphone, guitar, bass) is low, set the [MIC/LINE]
switch to “MIC.” When the output level of the connected equipment (such as a synthesizer, keyboard, CD
player) is high, set the [MIC/LINE] switch to “LINE.”
The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to [AUX
PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls
continuous parameters such as volume.
Example 1: Using a foot controller to control the volume of the performance data played
on the keyboard.
Connect an FC7 foot controller to the [AUX PEDAL] jack. With the initial factory settings, no special setup
is necessary.
Example 2: Using a footswitch to control Song Start/Stop.
Connect a footswitch (FC4A or FC5) to the [AUX PEDAL] jack. To assign the function to the connected
pedal, select “Song Play/Pause” in the operation display: [Menu] → [Assignable] → [Pedal].
NOTE
• Make sure to connect or disconnect the pedal only when the power is off.
• Do not press the footswitch/foot pedal while turning the power on. Doing this changes the recognized polarity of the footswitch,
resulting in reversed footswitch operation.
Connecting a Microphone or Guitar ([MIC/LINE IN] jack)
Connecting a Footswitch/Foot Controller ([AUX PEDAL] jack)
Foot Pedals
Foots
w
itch FC4A
Foots
w
itch FC5
Foot Controller FC7