148
148
CVP-98/96/600
Recall (RECALL) Display —
PAGE
13
This funciton can be used to recall the initial factory settings (basic
settings) for a range of parameters — individually or all at once.
Press the
▼
or
▲
buttons or use the data dial or [–/+] buttons to select
the group you want to recall, then press the
START
button.
➔
An “Are you sure?” confirmation prompt will appear. Press the
YES
button to recall or
NO
to cancel.
The following parameter groups of the Clavinova can be recalled.
• VOICE SETTING
• REVERB/EFFECT
• TUNE (master tuning, micro tuning, scale tuning)
• PEDAL
• ACMP SETTING (Auto Accompaniment-related settings)
• SONG SETTING
• REGISTRATION
• MIDI SETTING
• UTILITY (pop-up time, alert sound)
• ALL (all the above settings)
Refer to the list on page 35 in the Reference Manual for the specific
parameters of each group.
• The initial settings (basic settings) for
the Help language and the above
backup on/off settings are not recalled
by this function.
However, these and all other settings
can be reset to the initial factory values
by turning the power on while holding
the right-most key on the keyboard
(C7). When this is done, a “Back up
data erased and replaced by Factory
data” message appears to indicate that
all backed up data is erased and all
factory setttings are recalled. After this
message, the main display will appear.
Backup
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○