![Yamaha Clavinova CLP-265GP Service Manual Download Page 40](http://html.mh-extra.com/html/yamaha/clavinova-clp-265gp/clavinova-clp-265gp_service-manual_900350040.webp)
40
CLP-265GP
18
(18
: All LED ON
All LED ON Check
8.8.8.
Confirm that all LEDs on the panel light up.
19
(19
: All Red LED ON
All Red LED ON Check
8.8.8.
Confirm that all red LEDs on the panel light up.
20
(20
: All Green LED ON
All Green LED ON Check
8....8.8.
Confirm that all green LEDs on the panel light up. (LEFT,RIGHT)
26
(26
: Soft Pedal Check
Soft Pedal Check
PE1
When the soft pedal is depressed, the sine wave of C3 sounds and the 7segment
Str
LED indicates '
Str
'.
PAS
When the pedal is released, the sine wave of C4 sounds and the 7segment LED
indicates '
PAS
'.
27
(27
: Sostenuto Pedal Check
Sostenuto Pedal Check
PE2
When the sostenuto pedal is depressed, the sine wave of C3 sounds and the
Str
7segment LED indicates '
Str
'.
PAS
When the pedal is released, the sine wave of C4 sounds and the 7segment LED
indicates '
PAS
'.
28
(28
: Damper Pedal Check
Damper Pedal Check
PE3
When the damper pedal is depressed, the sine wave of C3 sounds and the
Str
7segment LED indicates '
Str
'.
PAS
When the pedal is released, the sine wave of C4 sounds and the 7segment LED
indicates '
PAS
'.
31
(31
: MIDI Check
MIDI Check
PAS
Connect MIDI IN and MIDI OUT terminals by a MIDI cable and execute the test.
Confirm that the 7segment LED indicates '
PAS
'. Display for NG: 'nG'
33
(33
: USB To Host Check
USB TO HOST Check
PAS
Connect TO HOST terminal to USB terminal of the PC. (In advance, install a
MIDI-USB driver in the PC. Also, set to the Thru On position on the PC side.
(See page 38.) Execute the test and confirm that the 7segment LED indicates
'
PAS
'.
35
(35
: Keyboard Type Check
Keyboard Type Check
Ececute the test. When the keyboard type is correct, the 7segment LED indicates
'
PAS
'.
36
(36
: Make Position Check
38
(38
: 2-3 Make Check
41
(41
: ROM Check2
Test for factory inspection
42
(42
: RAM Check2
Test for factory inspection
43
(43
: Wave ROM Check2
Test for factory inspection
45
(45
: Flash ROM Check2
Test for factory inspection
47
(47
: Factory Set
Factory Set
FAC
It sets all to the factory default settings. It takes about 7 seconds.
Execute the next item 48 surely.
48
(48
: Test Exit
Exit the test program and return to the play mode.
Never turn off the power while indicating ‘
dCL
dCL
dCL
dCL
dCL
’.
It returns to the play mode after the indicate of ‘
120
’.
Note: 0dBu = 0.775V
No.
7 segment. LED
Test Function and Judgement criteria