8
CLP-265GP
PK-LF Cable
PJK
<Bottom view>
[41c]
[41c]
PK Connector
<Bottom view>
<Front view>
PJK
(Fig.10)
(Fig.11)
[41c]: Bind Head Tapping Screw-B 3.0X8 MFZN2B3 (WE774400)
8.
FU60 Circuit Board
(Time required: About 7 minutes)
8-1
Remove the top board assembly (L) . (See procedure 2.)
8-2
Remove the top board assembly (S). (See procedure 3.)
8-3
Remove the FU cover. (U model only)(See procedure 4.)
8-4
Remove the FU60 assembly. (See procedure 4.)
8-5
Remove the two (2) screws marked [4] and the two (2)
nuts marked [5]. (N model only) (Fig.9)
8-6
Remove the two (2) screws marked [1] and the two (2)
screws marked [6]. The FU60 circuit board can then be
removed from the FU60 assembly. (Fig.9)
9.
PJK Circuit Board
(Time required: About 7 minutes)
9-1
Remove the top board assembly (L) . (See procedure 2.)
9-2
Remove the top board assembly (S). (See procedure 3.)
9-3
Disconnect the PK-LF cable. (Fig.10)
9-4
Remove the PK connector. (See procedure 4.)
9-5
Remove the two (2) screws marked [41c]. The PJK
circuit board can then be removed from the PK
connector. (Fig.11)
[6]
[6]
[5]
[4]
[1]
FU60
N model only
(Fig.9)
[1]: Bind Head Tapping Screw-B 3.0X8 MFZN2B3 (WE774400)
[4]: Bind Head Screw 3.0X10 MFZN2B3 (WF304400)
[5]: Hexagonal Nut M3 (WF559800)
[6]: Bind Head Tapping Screw-B 3.0X12 MFZN2W3 (WE987400)
[2]
[2]
[2]
[3]
[1]
[1]
[1]
MA80S
(Fig.8)
[1]: Bind Head Tapping Screw-B 4.0X8 MFZN2W3 (WE974600)
[2]: Bind Head Tapping Screw-B 3.0X10 MFZN2W3 (WE774200)
[3]: Bind Head Tapping Screw-B 3.0X16 MFZN2W3 (WE973400)
10.
Panel Assembly
(Time required: About 8 minutes)
10-1
Remove the top board assembly (L) . (See procedure 2.)
10-2
Remove the top board assembly (S). (See procedure 3.)
10-3
Remove the key cover assembly. (See procedure 5.)
10-4
Remove the two (2) screws marked [S10] and the six (6)
screws marked [S01]. The panel assembly can then be
removed. (Fig.12)
11.
PNL, PNR, MV Circuit Boards (Panel As-
sembly)
(Time required: About 10 minutes)
11-1
Remove the top board assembly (L) . (See procedure 2.)
11-2
Remove the top board assembly (S). (See procedure 3.)
11-3
Remove the key cover assembly. (See procedure 5.)
11-4
Remove the panel assembly. (See procedure 10.)
11-5 PNL Circuit Board
11-5-1 Remove the two (2) screws marked [50B]. The panel
holder assembly can then be removed. (Fig.13)
11-5-2 Remove the ten (10) screws marked [50E]. The PNL
circuit board can then be removed. (Fig.13)
11-6 PNR Circuit Board
11-6-1 Remove the two (2) screws marked [50C]. The panel
holder assembly can then be removed. (Fig.13)
11-6-2 Remove the eight (8) screws marked [50F]. The PNR
circuit board can then be removed. (Fig.13)
