Yamaha BEAR TRACKER YFM250XS, Owner'S Manual

Page: 268 / 376

8-17
1. Oil filter cover
2. Engine oil filter element
3. O-ring
1. Couvercle du filtre à huile
2. Élément du filtre à huile de moteur
3. Joint torique
1. Tapa del filtro de aceite
2. Elemento del filtro de aceite de motor
3. Junta tórica
5. Remove the oil filter cover and oil filter ele-
ment.
6. Clean the oil strainer and oil filter element
with solvent.
7. Inspect the O-ring and replace it if damaged.
8. Install the oil filter element, O-ring and oil filter
cover.
9. Install the oil strainer, compression spring,
O-ring and drain bolt.
10. Tighten the drain bolt and the oil filter cover
bolts to the specified torques.
CAUTION:
_
Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer.
_
11. Fill the engine with oil and install the engine
oil filler cap.
Tightening torque:
Drain bolt (engine):
43 Nm (4.3 m·kgf)
Oil filter cover bolt:
10 Nm (1.0 m·kgf)
U4XE65.book Page 17 Tuesday, May 6, 2003 1:38 PM