Yamaha BADGER YFM80N Owner'S Manual Download

Page: 79 / 141

7-26

POTENTIAL HAZARD

Climbing hills improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause the

ATV to overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for

climbing hills as described in this Owner’s

Manual.

Always check the terrain carefully before

you start up any hill.

Never climb hills with excessively slippery

or loose surfaces.

Shift your weight forward.

Never open the throttle suddenly or make

sudden gear changes.

The ATV could flip over backwards.

WARNING

Never go over the top of any hill at high

speed.

An obstacle, a sharp drop, or another

vehicle or person could be on the other

side of the hill.

Summary of Contents for BADGER YFM80N














































































































































Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands

Yamaha BADGER YFM80N, Owner'S Manual

Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands