Yamaha BADGER YFM80N Owner'S Manual Download Page 35

Page: 35 / 141

EBU00126

Fuel

Make sure there is sufficient gasoline in the

tank.

Your Yamaha engine has been designed to use

regular unleaded gasoline with a pump octane

number ([R+M]/2) of 86 or higher, or research

octane number of 91 or higher. If knocking or

pinging occurs, use a different brand of gasoline

or premium unleaded fuel. Unleaded fuel will

give you longer spark plug life and reduced

maintenance cost. If unleaded gasoline is not

available, then leaded regular gasoline can be

used.

Recommended fuel:

UNLEADED FUEL

Fuel tank capacity:

Total:

6.8L (1.5 Imp gal, 1.8 US gal)

Reserve:

0.9L (0.2 Imp gal, 0.2 US gal)

5-3

POTENTIAL HAZARD

Riding with improperly operating brakes.

WHAT CAN HAPPEN

You could lose braking ability, which

could lead to an accident.

HOW TO AVOID THE HAZARD

Always check the brakes at the start of

every ride. Do not ride the ATV if you find

any problem with the brakes. If a problem

cannot be corrected by the adjustment

procedures provided in this manual, have

the ATV inspected by a Yamaha dealer.

WARNING

Summary of Contents for BADGER YFM80N














































































































































Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands

Yamaha BADGER YFM80N, Owner'S Manual

Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands