background image

EBU00442

Engine oil

Make sure the engine oil is at the specified level.

Add oil as necessary.(See page 8-5.)

c

C

Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”)
contain anti-friction additives which will
cause clutch and/or starter clutch slippage,
resulting in reduced component life and poor
engine performance.

EBU00493

Final gear oil

Make sure the final gear oil is at the specified

level. Add oil as necessary. (See pages 8-7 ~

8-8 for details.)

If desired, an SAE 80W90 hypoid gear oil may

be used for all conditions.

NOTE:

GL-4 is a quality and additive rating, GL-5 or

GL-6 rated hypoid gear oils may also be used.

5-5

Recommended oil:

Recommended engine oil classification:

API Service SE, SF, SG type or higher

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Oil quantity:

Periodic oil change:

0.8 L (0.70 Imp qt, 0.85 US qt)

Total amount:

0.95 L (0.84 Imp qt, 1.00 US qt)

10°

30°

 50°

 70°

 90°    110°

SAE 5W30

–20°

–10°

 10°

 20°

 30°

   40°

 YAMALUBE 4 (20W40) or SAE20W40

YAMALUBE 4 (10W30) or SAE10W30

  130°F

   50°C

Summary of Contents for BADGER YFM80N














































































































































Reviews: