Yamaha BADGER YFM80N Owner'S Manual Download

Page: 80 / 141

7-27

If you are climbing a hill and you find that you

have not properly judged your ability to make it

to the top, you should turn the ATV around while

you still have forward motion (provided you have

the room to do so) and go down the hill.

POTENTIAL HAZARD

Improperly crossing hills or turning on

hills.

WHAT CAN HAPPEN

Could cause loss of control or cause the

ATV to overturn.

HOW TO AVOID THE HAZARD

Never attempt to turn the ATV around on

any hill until you have mastered the turn-

ing technique as described in the Owner’s

Manual on level ground. Be very careful

when turning on any hill.

Avoid crossing the side of a steep hill if

possible.

WARNING

When crossing the side of a hill:

Always follow proper procedures as

described in the Owner’s Manual.

Avoid hills with excessively slippery or

loose surfaces.

Shift your weight to the uphill side of the

ATV.

Summary of Contents for BADGER YFM80N














































































































































Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands

Yamaha BADGER YFM80N, Owner'S Manual

Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands