Yamaha BADGER YFM80N Owner'S Manual Download Page 75

Page: 75 / 141

7-22

Do not shift gears without releasing the

throttle. Damage to the engine or drive train

may occur.

When slowing down or stopping, release the

throttle and apply the brakes smoothly and

evenly. As you slow down, shift to a lower gear.

Be sure that the engine has sufficiently slowed

before engaging a lower gear. Improper use of

the brakes or shifting can cause the tires to lose

traction, reducing control and increasing the

possibility of an accident.

POTENTIAL HAZARD

Engaging a lower gear when the engine

speed is too high.

WHAT CAN HAPPEN

The wheels could stop rotating. This could

cause loss of control, an accident and

injury. It could also cause engine or drive

train damage.

HOW TO AVOID THE HAZARD

Make sure the engine has sufficiently

slowed before shifting to a lower gear.

WARNING

Summary of Contents for BADGER YFM80N














































































































































Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands

Yamaha BADGER YFM80N, Owner'S Manual

Search results

Summary of Contents for BADGER YFM80N

Reviews:

Related manuals for BADGER YFM80N

Brands by name

Popular brands