Yamaha AW4416, Service Manual

Page: 75 / 154

AW4416
34
Sub chassis
[900L]
[900L]
CN302
CN304
CN301
CN401
[900M] [900M]
[900M]
[900N]
LCD support
PN-SW
[930]
[980]
[950]
LCD support
LCD
PN-INV
PN-ENC
(Fig.7)
(Fig.8)
(Fig.9)
5-6 Remove the four (4) screws marked [900K].
The CD-RW holder can then be removed. (Fig.3)
5-7 Remove the fifteen (15) screws marked [900L].
The sub chassis can then be removed. (Fig.7)
5-8 Remove the four (4) screws marked [900M].
The LCD support can then be removed. (Fig.8)
5-9 PN-SW circuit board:
Remove the six (6) screws marked [900N].
The PN-SW circuit board can then be removed. (Fig.8)
5-10 LCD:
Remove the two (2) screws marked [930]. The LCD
can then be removed from the LCD support (Fig.9)
5-11
PN-ENC circuit board:
Remove the two (2) screws marked [980]. The PN-ENC
circuit board can then be removed from the LCD
support. (Fig.9)
5-12 PN-INV circuit board:
Remove the four (4) plastic rivets marked [950]. The
PN-INV circuit board can then be removed from the
LCD support. (Fig.9)
[900L]: Bind Head Tapping Screw-B
3.0 X 8 MFZN2BL (EP600190)
[900]: Bind Head Tapping Screw-B
3.0 X 8 MFZN2BL (EP600190)
[930]: Bind Head Tapping Screw-S
2.6 X 8 MFZN2Y (V5679500)
[980]: Bind Head Tapping Screw-S
2.6 X 4 MFZN2Y (VU757900)