Yamaha AW4416, Service Manual

Page: 51 / 154

AW4416
5
PHONES (unbalanced, TRS phone jack)
Nominal load impedance 8–40
Ω
Maximum output level 100 mW + 100 mW (40
Ω
load)
DIGITAL STEREO I/O Coaxial (phono)
Option card slot Slot
×
2
Digital I/O MY-8-AT (Adat)
MY-8-TD (Tascam)
MY-8-AE (AES/EBU)
Analog input MY-8-AD (TRS phone jack
×
8)
MY-4-AD (XLR-type
×
4)
Analog output MY-4-DA (XLR-type
×
4)
Digital mixer
Input channel (channel 1–24, playback 1–16)
Attenuator, Phase (normal, reverse), EQ (4-band
PEQ), Dynamics, Delay, On/Off, Fader (60 mm
motorized), Pan, Bus assign (stereo, bus, aux,
solo, direct out)
Internal effects return
Attenuator, Phase (normal, reverse), EQ (4-band
PEQ), Delay, On/Off, Fader (60 mm motorized),
Pan, Bus assign (stereo, bus, aux, solo)
Bus
Stereo L, R Attenuator, EQ (4-band PEQ), Dynamics, On/
Off, Fader (60 mm motorized), Balance
Bus 1–8 Attenuator
Aux 1–8 Attenuator
Solo L, R
OMNI OUT 1–4 (unbalanced, phone jack)
Output impedance 1 k
Ω
Nominal load impedance 10 k
Ω
Nominal output level 0 dB
Maximum output level +18 dBV
Fader 60 mm motorized
×
17
Frequency response +1, –3 dB, 20 Hz–20 kHz (MIC/LINE IN to STE-
REO OUT)
Dynamic range 109 dB (typical) DA converter (STEREO OUT)
(20 kHz, LPF, IHF-A)
104 dB (typical) AD + DA (LINE IN to STE-
REO OUT)
Total harmonic distortion
(20 kHz, LPF)
Less than 0.02% @1 kHz (LINE IN to STEREO
OUT)
Recorder section
General
Recording resolution 16-bit, 24-bit (set per song)