Yamaha AW4416, Service Manual

Page: 103 / 154

AW4416
74
4-2 Selecting and Executing a Test
(1) Use the or key to move the cursor to the test you wish to run.
(2) Press to run the test.
4-3 Test Result
(1) The test result is indicated to the left of the test item in the menu (see section 4-5, “Test Result Display”, below). If the
test ended normally, the screen displays . If test ended abnormally or was exited before completion, the screen
displays NG .
4-4 Canceling a Test
(1) You can cancel a test that is currently running test by pressing the
CANCEL
key.
4-5 Test Result Display
ENTER
Result Indication
Ended normally
Ended abnormally
Canceled
(1) Test Screen Type A
Test name Indication
Prompts Indication
Prompts & status
Indication
Exit method
Indication
Test name Indication
(2) Test Screen Type B
Exit method
Indication
Results Indication
Prompts Indication
5. Tests
With the exception of the SWITCH and LED tests, all tests are the same regardless of the test mode.
5-1 Test Runtime Screens
Test runtime screens differ according to the test. There are four basic screen types, A to D, as shown below.