Yamaha AW4416, Service Manual

Page: 138 / 154

109
AW4416
INT.EFF NOW SELECTED AUX. The internal effect is connected to the AUX send, and cannot be
inserted.
LOW BATTERY!!
The internal battery is running down.
MAKE NEW MIX.
There are no events to be edited. Please create a new mix.
MARK ERASED The mark has been erased.
MARK SET The mark has been set.
MIDI IN: DATA FRAMING ERROR!
Invalid data may have been received at the MIDI IN connector.
MIDI IN: DATA OVERRUN!
Invalid data may have been received at the MIDI IN connector.
MIDI: RX BUFFER FULL! The AW4416 is receiving more MIDI data than it can handle.
MIDI: TX BUFFER FULL! The AW4416 is attempting to transmit more MIDI data than it can
handle.
NO CURRENT AUTOMIX.
There is no valid automix data. Please create a new mix.
NO DATA TO RECALL.
Since data has not been stored, it cannot be recalled.
NO MARK LEFT The allowable number of marks has been exceeded.
PLAY TRACK MUTE IS ON Playback tracks were muted because the allowable number of
simultaneously recorded/played tracks was exceeded.
RECORDER BUSY
The operation cannot be executed because the recorder is operat-
ing.
RECORDER RUNNING
The operation cannot be executed because the recorder is record-
ing or playing.
REDO COMPLETE
Redo (re-execution of the previous operation) has been com-
pleted.
REPEAT POINTS TOO CLOSE The repeat interval is too short. It cannot be set to less than one
second.
SELECTED AREA HAS NO DATA. The selected area contains no trigger data.
SELECTED AREA HAS NO REGION.
The selected area contains no region.
SELECTED CH IS NONE.
The selected channel cannot be selected since it does not exist.
SELECTED CH ONLY MODE. The channel cannot be changed, since the display mode is set to
SELECTED CH ONLY.
SELECTED PAD NOT ASSIGNED. No sample is assigned to the selected sampling pad.
SELECTED SONG HAS NO REGION.
The selected song does not contain a region.
SELECTED TRACK HAS NO REGION.
The selected track does not contain a region.
SELECTED TRACK NOT RECORDED. The selected track does not contain recorded data.
SLOT1 INPUT SYNC ERROR! The signal being input to the input jack of a card installed in
OPTION I/O slot 1 is not synchronized to the word clock master.
SLOT1,2 INPUT SYNC ERROR!
The signal being input to the input jack of a card installed in an
OPTION I/O slot is not synchronized to the word clock master.
SLOT2 INPUT SYNC ERROR!
The signal being input to the input jack of a card installed in
OPTION I/O slot 2 is not synchronized to the word clock master.
SOLO READY.
The Solo function is ready. Use the [SEL] keys to select the solo
channel.
SOLO SLAVE. The Solo status cannot be changed when the AW4416 is function-
ing as a cascade slave. Press the Solo key on the master console.
SONG NUMBER FULL. The maximum number of songs has been reached.
SONG TOP/END OUT OF RANGE
You located outside the top/end range of the song.
STEREO PAIRED.
You are attempting to defeat ST LINK for the dynamics of paired
channels.