Yamaha AW 1600 Owner'S Manual Download Page 23

Page: 23 / 232

Parts of the AW1600 and what they do

Introducing the A

W1600

AW1600 Owner’s Manual

POWER switch

This switches the power between ON and STANDBY.

DC IN connector

Connect the included AC adaptor (PA-300) to this connec-
tor.

Eject switch

This switch ejects the disc tray.

Eject hole

This hole allows you to open the disc tray manually.

Access indicator

This indicator will light while the CD inserted in the drive
is being accessed.

• When switching the power of the AW1600 between ON and

STANDBY, you must follow the “Turning the power on/off” (

→

p. 11) procedures described.

NOTE

• Use only the included AC adaptor (PA-300) for this unit. Using

other types may be a fire and electrical shock hazard.

CAUTION

Front panel

■

CD-RW drive

Summary of Contents for AW 1600









































































































































































































































Search results

Summary of Contents for AW 1600

Reviews:

Related manuals for AW 1600

Brands by name

Popular brands

Yamaha AW 1600, Owner'S Manual

Search results

Summary of Contents for AW 1600

Reviews:

Related manuals for AW 1600

Brands by name

Popular brands