background image

n

The application for mobile devices does not detect the
unit

l

The unit and mobile device are not in the same network.

  Check the network connections and your router settings, and then connect the unit

and mobile device to the same network.

l

The MAC address filter is enabled on the unit.

  In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or

specify the MAC address of your mobile device to allow it to access to the unit. For

details, see the following:

– “Setting the MAC address filter” (p.112)

l

The unit is connected to a multiple SSID router.

  Access to the unit might be restricted by the network separation function on the

router. Connect the iPhone to the SSID which can access the unit. (Connect it to
the Primary SSID at the top of the list.)

n

Firmware update via the network is failed

l

It may not be possible depending on the condition of the network.

  Update the firmware via the network again or use a USB memory device. For

details, see the following:

– “Updating the firmware via the network” (p.114)

 

 

Bluetooth® trouble

n

A Bluetooth® connection cannot be established

l

The Bluetooth function of the unit is disabled.

  Enable the Bluetooth function. For details, see the following:

– “Setting the use of Bluetooth

®

” (p.115)

l

Another Bluetooth device is already connected to the unit.

  Terminate the current Bluetooth connection and then establish a new connection.

For details, see the following:

– “Playback Bluetooth

®

 device music on the unit” (p.66)

l

The unit and the Bluetooth device are too far apart.

  Move the Bluetooth device closer to the unit.

l

There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.

  Move the unit and the Bluetooth device away from those devices.

l

The Bluetooth device does not support A2DP.

  Use a Bluetooth device that supports A2DP.

l

The connection information registered on the Bluetooth device is not working
for some reason.

  Delete the connection information on the Bluetooth device, and then establish a

connection between the Bluetooth device and the unit again. For details, see the
following:

– “Playback Bluetooth

®

 device music on the unit” (p.66)

 

 

En

133

Summary of Contents for AVENTAGE RX-A680





































































































































































Reviews: