Setting the network name of the unit
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Setup menu
“Network” > “Network Name”
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER key to edit the name.
3
Select “OK” to confirm the new name and press ENTER.
4
Press SETUP.
This completes the settings.
Setting the power interlock from the unit to
MusicCast compatible devices
Selects whether turning on the power of the master device of the MusicCast network
(this unit) also turns on the power of other devices of the network.
Setup menu
“Network” > “MusicCast Link Power Interlock”
Settings
Off
Disables the power interlock from the unit (MusicCast master).
On
Enables the power interlock from the unit (MusicCast master).
Updating the firmware via the network
Updates the firmware via the network. You can select “Perform Update” after the unit is
ready for firmware update. You can also check the firmware version and system ID.
Setup menu
“Network” > “Network Update”
NOTE
▪ Firmware update takes about 20 minutes or more.
▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update
may not be possible depending on the condition of the network. In this case, wait until firmware update is
ready, or update the firmware using the USB memory device. For details on using the USB memory
device, see the following:
– “Updating the firmware (UPDATE)” (p.122)
En
114
