Yamaha AVENTAGE RX-A680 Owner'S Manual Download

Page: 115 / 164

Configuring the Bluetooth® settings

Setting the use of Bluetooth®

Enables/disables the Bluetooth function.

Setup menu

“Bluetooth” > “Bluetooth”

Settings

Off

Disables the Bluetooth function.

Enables the Bluetooth function.

Terminating the connection between a Bluetooth®

device and the unit

Terminates the Bluetooth connection between a Bluetooth device (such as a
smartphone) and the unit.

Setup menu

“Bluetooth” > “Audio Receive” > “Disconnect”

Select “Disconnect” and press ENTER to terminate the Bluetooth connection.

NOTE

This setting is not available when no Bluetooth devices are connected.

Setting the use of the Bluetooth® Standby function

Selects whether to enable/disable the function that turns on the unit from Bluetooth
devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns

on when a connect operation is performed on the Bluetooth device.

Setup menu

“Bluetooth” > “Audio Receive” > “Bluetooth Standby”

Settings

Off

Disables the Bluetooth standby function.

Enables the Bluetooth standby function.
(The unit consumes more power than when “Off” is selected.)

NOTE

This setting is not available when “Network Standby” is set to “Off”. For details, see the following:

▪ “Setting the use of the Network Standby function” (p.113)

115

Summary of Contents for AVENTAGE RX-A680





































































































































































Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands

Yamaha AVENTAGE RX-A680, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands