Yamaha AVENTAGE RX-A680 Owner'S Manual Download Page 134

Page: 134 / 164

No sound is produced, or the sound is interrupted
during playback with Bluetooth® connection

The volume of the Bluetooth device is set too low.

Turn up the volume of the Bluetooth device.

The Bluetooth device is not set to send audio signals to the unit.

Switch the audio output of the Bluetooth device to the unit.

The Bluetooth connection has been terminated.

Establish a Bluetooth connection between the Bluetooth device and the unit again.

For details, see the following:

– “Playback Bluetooth

device music on the unit” (p.66)

The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.

Move the unit and the Bluetooth device away from those devices.

134

Summary of Contents for AVENTAGE RX-A680





































































































































































Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands

Yamaha AVENTAGE RX-A680, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands