10
DANTE ACCELERATOR Getting Started
Installing the Card
Installing the Card
Before You Install
Before you install the Dante Accelerator,
you should note down the last 6
characters of the MAC address printed on
the label on the card. The last six
characters of the MAC address of the
card are used in the default device name
of Dante Controller.
For example, a Dante Accelerator with
MAC address 00:1D:C1:03:01:C4 will
show as "****-0301C4" (where **** is the
name of the card) in the Dante Controller
until it is given a more suitable name.
Installing and Removing
the DANTE ACCELERATOR
For instructions on installing and
removing the Dante Accelerator, please
refer to the technical manual for the
computer in which you are installing the
card.
If you remove the card, store the card in
its anti-static bag and packaging while not
in use.
Installing the DANTE
ACCELERATOR Driver
You will need to install the relevant driver
on your computer before your Dante
Accelerator can be used.
Download your driver software and the
installation guide containing the
instructions on how to install the driver
from the following website:
http://www.yamahaproaudio.com/
E
n
g
lis
h
USO
RESTRITO
