6
DANTE ACCELERATOR Getting Started
Getting Started
Getting Started
This manual describes the setup
procedure you will need to operate the
Dante Accelerator.
To start using your Dante Accelerator,
follow the steps below.
1.
Install Dante Accelerator in your
computer and driver software.
For details, refer to the section
"About the DANTE
ACCELERATOR" on page 8.
2.
Download and install your Dante
Controller.
From the Audinate website
–
www.audinate.com.
3.
Set up your Dante network.
For details, refer to the section
“Connecting to a Network” in the
Operation Manual.
4.
Configure your audio software to
use the Dante Accelerator.
For details, refer to the sections
“Basic Operation” and “Configuring
the Card” in the Operation Manual.
NOTE
•
Download the Operation Manual from the
following website:
http://www.yamahaproaudio.com/
•
To view PDF files, you will need to install
Adobe Reader on your computer. You can
download the latest Adobe Reader at the
following website.
http://www.adobe.com/
E
n
g
lis
h
USO
RESTRITO
